Centrifugal pumps with open impeller
Centrifugal pumps with open impeller
GA/1A Centrifugal pumps with open impeller
PERFORMANCE RANGE
flow rate up to 250 I/min(15m3/h)head up to 20mOPERATING LIMITS
suction lift up to 7mfluid temperature up to 60oCmaximum ambient temperature 40oC
PUMPS INSTALLATION AND APPLICATIONS
GA pumps are recommended for pumping water and fluids which are not chemically aggressive to the pump components.The open impeller design enables fairly large amounts of impurities to be pumped without danger of clogging.
GA pumps are very dependable,simple to use,and virtually maintenance-free.They suit a wide range of industrial applications watering gardens and transferring water from canals,rivers,tanks,tubs,etc.
These pumps should be installed in a covered area,protected against the weather.
PERFORMANCE
Special attention was given,when designing performance levels for the GA range,to typical requirements for pumps having to perform the functions described above.
The result is a series of pumps characterized by:
especially wide and flat characteristic curves,making it possible to handle large quantities of water.efficiencies with high absolute values over much of the characteristic curve(efficiency curves that tend to be flat)flat adsorption curves at hight delivery rates,to prevent motor overloading even during prolonged use at high rates.STRUCTURAL CHARACTERISTICS
cast iron pump bodystainless steel pump body coverstainless steel mechanical seal(graphite ceramic)brass impeller with open typeHi-Cr plated 45# steel shaftprotetion IP44with thermal overload protector in single phase motorNSK bearing or local bearing
PUMP MODEL | POWER | Q M3/h | 0 | 3.0 | 4.5 | 6.5 | 7.5 | 9.0 | 10.5 | 12.0 | 13.5 | 15.0 | |
Single phase | KW | HP | I/min | 0 | 50 | 75 | 100 | 125 | 150 | 175 | 200 | 225 | 250 |
GA/1B | 0.60 | 0.80 | H m | 16 | 16 | 15.5 | 15 | 14.2 | 13 | 12 | 10.5 | 8.5 | 6 |
GA/1A | 0.75 | 1 | 20 | 20 | 19.5 | 19 | 18 | 16.7 | 15.2 | 13.5 | 11.5 | 9 |